DLS Performance CAT31

CAT31, now in a new exclusive design, but the inside is of the same high quality as before. CAT31 is a 24 Volt amplifier for trucks and buses. It is a three channel amplifier with a nominal output of 2 x 75 Watts + 1 x 170 Watts (1 x 280 Watts in 2 ohm). Built-in high-pass, low-pass and subsonic filters. Variable phase control on sub channel. High level input. Protection circuits shut down the amplifier in the event of overloads. The perfect amplifier for a standard installation with a front system in stereo and a subwoofer in the back. High level input with auto start. The amplifier is 1 ohm stable.
- RMS output power @ 24 V, 20Hz - 20 kHz


Specifications

Number of channels 3
Amplifier class AB
Output power in 4 ohm 2 x 75 W
Mono bridge mode 4 ohm N/A
Output power in 2 ohm 2 x 145 W
Mono sub channel 4 ohm 170 W
Mono sub channel 2 ohm 280 W
Damping factor > 100
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 35 kHz
Input sensitivity 0,25 - 5 V
Input impedance > 10 kohm
Input impedance, high level 100 ohm
High level input with auto start 1
Filters channel A & B HP: 50-150 Hz.
Voltage 24 - 30 Volt DC
Power consumption (idle) 0,7
Power consumption (max) 40 A
Rec. power cable Minimum 7AWG / 10 mm2
Fuses 2 x 20 A
Dimension (W x D x H) 70 x 357 x 268 mm (2,92 x 14,06 x 10,55")
Weight 4 kg ( 8,8 lb)